LOOK P24
Bike and rider become one

A New Approach

The innovative construction of the LOOK P24 represents a new approach to track cycling aerodynamics. At LOOK Cycle we have a unique knowledge and experience of track cycling. That is now we knew a glass ceiling could be broken in the search for speed. When it comes to cycling and aerodynamics it is impossible to take the rider out of the equation.

But can you remove the bike? From the beginning, we integrated the rider in our development rather than working on the bike in isolation. At every step of our design process, we considered the synergy between human and machine, and came up with a new approach.

Assembling Perfection

Through the use of modularity and craftmanship. Building the fastest track bike is like building a Formula 1 car. Every section, every part and component play a very important role in the overall performance of the bike. We divided the frame into sections and tested each of them individually, improving every little detail, using 3D printed parts assembled on a metallic skeleton.

380 Hours of 3D printing and hundreds of versions tested in order to achieve exceptional manufacturing.

Unrivalled aerodynamics

When we put the LOOK P24 into a wind tunnel, we saw impressive aero gains compared to both its competitors and the LOOK T20, making it one of the highest performing track bikes in the world. We tested every promising CFD design, using interchangeable 3D printed parts, first with a mannequin then a human, in the process. The result is mind-blowing.

40 Hours of wind tunnel testing

Unmatched Stiffness

An evolution of what has been before, the LOOK P24 utilizes the complex carbon lay-up of the LOOK T20 to provide the best stiffness values, offering incomparable power transfer on starts, sprints and turns. Using the successful fibers mix of the LOOK T20 (UHM – HR – HM lay-up) as the foundation, the LOOK P24 is a completely new development of frame and parts. Our unrivalled expertise in carbon and state of the art aerodynamic development, come together to create the fastest bike on the track.

52 Hours carbon draping for 1 frame

Bike & Rider Become One

Right from the start, we used a 3D mannequin in our CFD (Computational Fluid Dynamics) calculations, relying on the rider-machine combination as the best approach. The results have changed the way we look at the aerodynamics of frames and components.

Discover the bike

Fork And Cockpit

The fork and cockpit match the rider aerodynam-ics. Associated with the AIR cockpit, the front wind resistance is drastically reduced.

FAST : Flow Aero Section Technology

Perfectly aligned with the rider’s body sections, the frame and the fork of the LOOK P24 are designed to disappear, having a very low impact on the CX while delivering a impressive power transfer and a precise handling of the bike.

Seat Stays And Post

The seat stays and the double seat post mast are perfectly aligned with the rider’s air drag, offering minimal interference enabling them to hit the straights and the corners with maximum speed.

Multiple configurations, for gains in all disciplines.

Poursuite

When it comes to endurance efforts, the LOOK P24 aero gains mount up and give the rider a race-winning 61 meters advantage.

0.210 Seconds gain per lap
4 Meters advantage per Lap
3.5 Seconds gain over 16 Laps
61 Meters advantage on 16 Laps

Sprint

For short and mass start races, raw power is the key to victory. The LOOK P24 offers a stunning 91 watts saving and gives riders a never before seen 7 meter advantage per lap of the track.