The LOOK Keo Blade Ceramic Vision pedals enhance safety thanks to their integrated lighting, visible to other road users from up to 1 km away, both day and night. Fully integrated, easy to remove, rechargeable, and combined with the world-class performance of ceramic pedals.
Visible. Every moment.
Since 2017, the LOOK Geo CityVision urban pedals have featured an innovative lighting system, recognized for enhancing visibility and improving safety. Today, as road awareness is more essential than ever, the LOOK Keo Blade CeramicVision pedals adopt this concept with a lightweight, rear-integrated, cutting-edge lighting system designed to ensure you are seen and stay safe.
Safety starts with being seen
These revolutionary 60-lumen lights are visible from up to 1km away in daylight. With studies showing drivers react to red lights much earlier, even in full sun, that guarantees a safer, faster ride. Integrating the lights into the pedals also delivers 180° visibility, meaning you’re visible from every angle, wherever the ride takes you.
Immediatly visible
Research shows that this advanced pedal-light system makes you safer on the roads. In fact, a groundbreaking American study* revealed that lights attached to a rider’s heels made them 5.5 times more visible than a seatpost light. That’s because motion-based lighting catches a human’s attention faster than steady light.
*Darlene E. Edewaard (2020) Clemson University
Long rides, rapid charge
Each light keeps you visible, safe and riding confidently for up to 40 hours, while a full recharge takes just 2 hours via the included USB-C charger. With its built-in battery indicator, you’ll always know when to recharge, ensuring your lights are ready to keep you visible and safe.
Technology Start & Stop
The Start & Go system automatically detects when you stop or ride. After 30 seconds of complete stillness, the lights switch to standby to save battery, then instantly turn back on as soon as you start pedaling again.
Four modes, two aims: Safety and confidence
The Keo Blade Ceramic Vision pedals adapt to every condition with four distinct lighting modes. During the day, Day Flash emits intense bursts that immediately catch the attention of drivers. At night, Night Flash takes over with sharp pulses designed to ensure maximum visibility in the dark. For longer night rides, Power Steady delivers a strong, steady beam that lights up the road reliably. Finally, the Steady mode provides continuous light, ideal for low-light environments.
Easy installation
Installation and removal couldn’t be simpler. No tools are required. Instead, the ingenious ‘snap’ and ‘push’ mechanism means you can install, recharge or switch pedals in less than three seconds. Speed doesn’t come at the expense of security as these lights stay stable over the toughest terrain.
Built to endure
The powerful lights come with an IPX7 waterproofing rating, ensuring you’ll remain visible through the wettest of rides. That breeds confidence, meaning you can focus on riding strong atop rain-soaked roads. Beat the weather and keep on pedalling.
The perfect combination
Modern cycling is about integration and smooth lines, both for aesthetic and aerodynamic reasons. LOOK Cycle’s world-class engineers tested many iterations of the LOOK Keo Blade CeramicVision until arriving at perfection – lightweight lights that are imperceptible on these world-class pedals until it’s time to be seen.
Ceramic bearings
Reducing friction is essential to increase speed and reduce effort.
Our ceramic bearings, featuring perfectly spherical and ultra-durable balls, reduce rolling resistance by 18% and extend lifespan by 4 to 6 times compared to traditional steel bearings.
Every aspect of the pedal is optimized to maximize your speed and minimize your effort with every kilometer.
Low wight, High speed
The LOOK Keo Blade Ceramic pedals plus lights hit the scales at just 270g for the pair. That’s 230g for the pedals and 40g for the lights.
A blend of cutting-edge materials – carbon and ceramic at its heart – leads to reduced rotational mass for improved acceleration, better climbing efficiency and more explosive sprints. In short, a faster you.
Simplified Tension Adjustment
Blade technology offers 4 tension levels: 8/12/16/20. In less than 30 seconds and with a single specialized tool, swap the blades to choose your ideal tension with complete flexibility.
Technical specifications
Axle
Spindle material
Chromoly+
Body & platform
Body material
Carbon
Platform area
705 mm²
Platform width
64 mm
Total stack height (pedal + cleat)
14,8 mm ( 8,5 + 6,3 )
Q Factor
53 mm
Retention & cleats
Retention
Serial installed in 12
Cleats
Keo Grip
Blade
Carbon
Lights
Light modes
4 (Day flash 60 lm / Night flash 10 lm \ Steady 3 lm / Night steady 2 lm)
Light output
From 2 to 60 lumens
Battery
Up to 40h
Unit light weight
20 g
Beam angle
180°
Light included
Yes (x2)
Weight & accessories
Pedal
135 g
Weight pair + cleats
340 g
Your most frequently asked questions about pedals & cleats
*Approximate values, provided for guidance and educational purposes only. Actual values
may vary depending on several parameters. Figures calculated for a EU 42–43 shoe size, cleat in
standard position.
Release is performed by rotating the heel laterally outwards. These
equivalents correspond to the force your heel must exert to initiate this movement: at 12 Nm,
unclipping is equivalent to moving roughly 6 kg laterally with your heel.
Two parameters can refine your choice
Shoe size — The larger your shoe size, the greater the leverage between the cleat and
the heel, and the less force required to release at equal tension.
Cleat position — A rearward cleat (mid-foot position) brings the pivot point closer to
the heel and therefore reduces the leverage: releasing requires more effort at equal tension.
If your cleat is in a rearward position, a lower tension may be more suitable.
Universal rule — When in doubt between two tensions, always choose the lower
value. The KEO Blade is interchangeable: you can move up to a higher tension as you progress.