The 795 LIGHT RS is the most advanced aero-road bicycle with respect to integration and reflects more than 30 years of LOOK engineer know-how and expertise. It is exemplified by a perfect command of geometric frame design, choice of tube thickness and the assembly of the carbon materials used in the manufacturing process.
This version that incorporates comfort as a true performance factor benefits from 5 major developments:
– Cable routing to facilitate assembly and maintenance.
– 100% carbon bottom bracket for more rigidity.
– E-POST 2 EVO.
– Di2 cover for an easier connection
– ADH2 handlebar with integrated QUICK RELEASE.
795 RS AERO TECHNOLOGY
Tested in a wind tunnel, the 795 has been entirely designed to achieve the best of its aerodynamic tube shapes as defined by the NACA (National Aerospace Committee for Aeronautics). Its NACA profile is perfect on all the tubes cut horizontally in relation to the ground, which allows the 795 AEROLIGHT RS to benefit from an aerodynamic gain of 11.7% as compared to a traditional racing bicycle (type 695). This represents a 1min 14s gain on a 100km ride on a track.
Designing a bicycle at LOOK does not mean building a frame, then the components.
The creation of a LOOK carbon bicycle is seen as a whole, where the components are thought out and crafted to blend with the frame.
Each element that is connected to the frame must be able to improve the performance of the bicycle. From this integration has come an elegant design and the fluid lines that LOOK knows how to master.
HM Carbon 1,5K Technology
HM: High Modulus. « High-end » fibers. Their stiffness is very high, on average double that of HR fibers. The HM fibers permit more rigidity without the added weight. LOOK bicycles are made with either HM 3K or 1.5K fibers, the latter having a finer weave and therefore lighter (ie. a 1.5 fiber =1500 threads in 1 fiber).
For over 30 years, LOOK has developed a unique expertise and an exceptional experience that allows the combining of different types of fibers to achieve specific characteristics.
We master the parameters of carbon composition in order to produce the desired behavior.
E-POST 2 EVO SEATPOST
The E-POST 2 EVO seatpost allows a large range of fore-and-aft adjustment and evolves regarding its new clamping system and how it is secured in the frame. A « tightening wedge » provides powerful support of the seatpost in the frame. An outer elastomer enables the seatpost to filter vibrations and improve rider comfort even more.
The AEROSTEM is made of HM carbon. It is Aerodynamic and may be inverted, offering a large amount of versatility. Its range varies from -13° and +17°, allowing cyclists to achieve the lowest to highest positions: Six lengths are available, from 80mm to 130mm, in 10mm increments.
Rigid, it provides an excellent piloting position. Weighing a meager 149g, the AEROSTEM is an excellent choice for a lightweight stem.
Di2 COVER FOR AN EASIER CONNECTION
The Di2 junction box is still fitted in the frame via a small cover located just beyond the stem, but this cover has been redesigned to allow the junction box to be clipped directly onto its underside. This way, all the Di2 functions are accessible from the external face of the cover making it no longer necessary to have to physically remove it. Recharging the battery is also a snap thanks to this design improvement.
ADH2 HANDLEBAR WITH INTEGRATED QUICK RELEASE
This version incorporates rapid brake quick release levers (opening and closing of the calipers) for repairs, wheel changes or when adjusting the brake pads due to wear. Adjusting the integrated brakes is easier and more accessible, even while riding the bicycle.
The handlebar has space on either side of the stem that measures 31.8 mm in diameter, enabling the installation of armrests and aero bars to adopt an even more aerodynamic riding position, or the mounting of a computer or camera.
The aerodynamic design of the handlebar has been optimized to give the cyclist more space when pedaling out of the saddle, therefore, avoiding any risk of contact between the cyclist’s knees and the back of the handlebars.
Direct Drive Concept
The LOOK « Direct Drive Concept » is the optimization of all the parameters that make up the cockpit. This is notably done through the integration of the stem, as an extension of the bicycle itself, and also by the use of a short and tapered headset.
The total of these factors provide an excellent rigidity that is necessary for an optimal piloting position.
HM IM FIBERS AND HR ULTRALIGHT 1.5K
HSC 8 : 320 GRS
AEROSTEM CARBON ADJUSTABLE FROM -13° TO +17°
6 LENGTHS: 80-90-100-110-120-130MM
WITHOUT: MONOBLOC CONTRUCTION
ZED SPECIFIC 65 MM
ZED 2 AERO COMPATIBLE COMPACT (110 MM) OR DOUBLE (130 MM) – ADJUSTABLE ARMS : 170 / 172.5 / 175 MM
(DELIVERED WITH BOLTS BUT NO CHAINRINGS)
FRONT DERAILLEUR HANGER
E-POST 2 EVO INTERNAL Di2 BATTERY COMPATIBLE
HEADFIT 5 INTEGRATED 1″1/2 TOP AND BOTTOM STAINLESS CARTRIDGE : 52 MM – ANGLE SET 36°/45°
COMPRESSED CARBON – MONOBLOCK CHAIN AND SEAT STAYS, REPLACEABLE ALUMINUM REAR DERAILLEUR HANGER
WATER BOTTLE FITTING
XS – S – M – L – XL
2300 GR . WITH SEAT TUBE NOT CUT IN SIZE S
COLORED HOUSING KIT
BLACK PROTECTIVE COVER
TUBE CUTTING GUIDE