The Kéo Power is the go-to pedal for advanced cyclists and triathletes that want to analyze their performance with the intention of improving upon it. It measures power, force, and cadence.
Power is an essential piece of information to a cyclist because independent of the environmental conditions and level of fatigue, it will provide an unbiased measurement of his or her fitness level and training intensity.
The Essential version measure data from the left pedal.
Reliable power measurement
The Kéo Power Dual Mode is the third generation of LOOK power meter pedals. The measurements of motor effort are provided by 8 strain gauges installed in axle of each pedal. This ensures a reliable power measurement because it is calculated directly where the force is applied by the rider.
For even more precision, the Regular version has a sensor in each pedal which provides an individual power output measurement for both the left and right leg.
With the Essential version, data is only measured from the left pedal.
In addition to the power and cadence reading, the Kéo Power measures your strength, and pedaling efficiency (dead spots/regularity).
Compatible BLUETOOTH & ANT+
The 2016 KÉO POWER works with all compatible measuring devices on the market that are equipped with:
• BLUETOOTH SMART: iOS 4 S +, ANDROID4.3 +, POLAR, LEZYNE, CATEYE,…
• ANT +: GARMIN, SIGMA, CATEYE, BONTRAGER, PRO, MIO, CICLOSPORT, PIONEER, POWERTAP, OSYNCE, MAGELLAN, FALK, SPECIALIZED, SUUNTO, SRM…
A LOOK Pedal
Kéo Power relies on the features that make LOOK pedals so successful:
• wide contact platform: 62mm – 400 mm2 for an excellent pedaling stability and power transmission.
• Reduced pedal stack height: 17.5 mm, for optimal movement.
• Lightweight: 150g more (compared to a pair of LOOK high-end pedals). The miniaturization of electronics allowed the weight, even with the sensor, to stay the same, 388g per pair in the Regular version / 369g pair for the Essential.
Special attention was unquestionably given to the pedal spindle, (3 double bearings) and subject to the same product testing as other axles. KÉO POWER spindles have proven themselves on the basis of 2 million cycles at 100 rpm with a 90kg load on the center of the pedal coupled with an eccentric rotation (creating a shock on each rotation). This test is by far more grueling than the industry standard (EN1478).
Easy and fast installation
Installing a power meter is not always easy. Kéo Power solves this inconvenience by integrating the sensor directly into your pedals for a straightforward and fast installation in minutes. As a result, it will be very easy for you to move your power meter from on bicycle to another if needed, contrary to other non-portable systems.
The new sensor design makes it compatible with virtually all existing pedals.
The battery life of the transmitter is 150 h and can be easily recharged with the included docking station. Its software is easily updated via the KÉO POWER app.
Competition / Regular / Training
9/16 X 20 mm
2 ball bearings, 1 needle bearing cartridge
PEDAL STACK HEIGHT
DISTANCE PEDAL SPINDLE / CRANK ARM
55 +/- 0,6mm
CONTACT SURFACE AREA
Adjustable spring from 9 to 15
Kéo Grip Cleats Grey
0°, 4,5° or 9° according to the cleat color (Black, Grey, Red)
A pair of Kéo Grip cleats + screws + base station + tools