Allows returning to a traditional seat post with an integrated seat post frame of E-Post type
Facilitates reselling the bike
Allows saddle height settings of great amplitude
Large saddle retraction setting range
Specific saddle clamp adapted to carbon frames
Aerodynamic shape and carbon conception for increased lightness
Reversible and adjustable + or - 5 mm
- SINGLE-PIECE HM CARBON
- SADDLE CLAMPS
- FORGED CARBON
- SPECIFIC NON CIRCULAR
- BLACK / RED GLOSS VARNISH
- BLACK/WHITE MAT VARNISH
- + OR - 5 MM
- TOTAL HEIGHT (CARRIAGE AXIS / END OF TUBE)
- 325 MM
- MINIMAL INSERTION
- 80 MM
- WORKING DEPTH (CARRIAGE AXIS / INSERTION LIMIT)
- 245 MM
- SETTING CAPACITY
- 200 MM
- SADDLE STEM HEAD HEIGHT
- 45 MM
- 210 G
- COMES WITH A SPECIFIC COLLAR ADAPTABLE ON THE FRAME.
- 1 YEAR
• ALLOWS RETURNING TO A TRADITIONAL SADDLE STEM WITH AN INTEGRATED SADDLE STEM FRAME OF E POST TYPE
The RSP saddle stem allows returning to a traditional saddle stem (that slides in the frame) on a frame equipped with an integrated saddle stem tube of E-Post section. It is very useful when the possible raise of 30 mm of the E-Post is not sufficient.
• FACILITATES RESELLING THE BIKE
Through this great capacity of height setting, this saddle stem is an excellent answer to consumers who wish to resell their like to someone much taller.
• ALLOWS SADDLE HEIGHT SETTINGS OF GREAT AMPLITUDE
Thus facilitates saddle height settings when testing the bike.
• LESS COMFORTABLE THAN THE E-POST SYSTEM
Attention, although the RSP saddle stem is designed to be confortable, passing to RSP will be less efficient than the E-Post technology to filter vibrations. The sensation of comfort on the bike will thus be less important.
2 VERSIONS AVAILABLE :
|RSP Road||RSP R5|
|Retraction||-15 to -45 mm||+ or – 5 mm|
|Total height:(carriage axis / end of tube)||357 mm||325 mm|
|Minimal insertion||80 mm||80 mm|
|Working depth:(carriage axis / insertion limit)||277 mm||245 mm|
|Setting capacity||200 mm||200 mm|
|Saddle stem head height||77 mm||45 mm|
|Weight||210 g||210 g|
ATTENTION: Because of the morphology of LOOK frames, cutting of the saddle stem along the indicated limit (90 mm from the end of the sheath) will be necessary to reach the lowest positions.