KÉO BLADE CARBON ANDRE GREIPEL

KÉO BLADE CARBON

ANDRE GREIPEL

The KEO BLADE CARBON is the choice of professional cyclists. With this limited edition « André GREIPEL », we pay tribute to one of the most powerful and emblematic sprinters in the peloton otherwise known as the « Rostock Gorilla ».

 

« I am very proud and honored to have been chosen as a new LOOK brand ambassador. It is an honor to represent the French brand at the highest level. I have been riding with LOOK for over 6 years, the best performing pedals in the most explosive sprints, on full power, beyond my limits. » André GREIPEL

Technologies

Spindle : More stability and better load distribution

 

The Blade Carbon pedal spindle was designed to obtain a very low stack height: only 13mm. It uses a needle bearing cartridge installed in a central position for better stress resistance while pedaling and two spaced out ball bearings which distribute the load, providing increased rigidity between the body and the length of the spindle guaranteeing excellent rotational speed.

 

Axle play (related to internal bearing movement and part wear) is eliminated by a wave spring that constantly applies a pre-load that does not deteriorate over time. When pushing hard on the pedals, this system can completely eliminate the annoyances caused by any play (noise and sensation of friction ).

 

LOOK axles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation). This is equivalent to a Mark Cavendish sprint at 1700 watts with 100 revolutions/min for 333 hours! This test is far superior to the current industry standard, the EN14781.

Contact surface area : Maximum power transfer

 

To answer the desires of some of the most demanding cyclists, notably competitors, the pedal and cleat system must allow efficient power transfer through a broad and rigid contact surface.

 

Because of this, the Blade Carbon platform surface is covered with a 64mm wide, stainless steel plate that has been molded into the body and optimizes, regardless of pedaling style, the over 700 mm² cleat/pedal contact area.

Carbon Technology

 

Using a carbon body can lighten the pedal weight and provide an additional gain in stiffness for better power transfer.

 Specifications

USAGE

Recreational to Competition

BODY

Carbon

AXLE

Chromoly +

THREADING

9/16 X 20 mm

BEARINGS

2 ball bearings, 1 needle bearing cartridge

PEDAL STACK HEIGHT

13 mm

DISTANCE PEDAL SPINDLE / CRANK ARM

53 mm

CONTACT SURFACE AREA

700 mm²

FLOAT

3 types of carbon blades: 12, 16

CLEATS

Kéo Cleats Grey

ANGULAR MOVEMENT

0 °, 4.5 ° or 9 ° according to the cleat color (Black, Grey, Red)

PEDAL WEIGHT

110 gr (288 gr per pair with cleats and screws)

COLORS

Black

ACCESSORIES

A pair of Grey Kéo cleats + screws

GUARANTY

2 years