QUARTZ CARBON
Excellent mud evacuation
Very light: 135 g
Most Stable Platform Available
Easy Entry and Release
The all new cleat retention spring system.
The Quartz Carbon pedal excels in mud evacuation, improved stability and efficient power output with all brands of shoes.
- USE
- MTB - LEISURE TO COMPETITION
- BODY
- INJECTED CARBON
- AXLE
- STEEL
- THREADS
- 9/16 X 20 MM
- BEARINGS
- 1 CARTRIDGE BEARING, 1 NEEDLE BEARING
- SEALS
- 1 LIP SEAL + 1 BEARING SEAL
- HEIGHT
- AXLE / SOLE 12,5 MM (CLEAT SUPPORT)
- DISTANCE
- PEDAL AXLE / CRANKARM 53 MM
- MULTITENSOR
- NO
- CLEATS
- QUARTZ CLEATS
- ANGULAR PLAY
- ± 3°
- LATERAL PLAY
- ± 1,5MM
- PEDAL WEIGHT
- 135 G (308 G PER PAIR WITH CLEATS AND MOUNTING BOLTS)
- COLORS
- BODY BLACK AND WHITE
- ACCESSORIES
- SOLD WITH 1 PAIR OF 15° CLEATS, 1 PAIR OF 20° CLEATS, ASSORTED FITTING SPACERS AND 4 BOLTS
- WARRANTY
- 2 YEARS
• 2009 EVOLUTION – ENTRY / RELEASE
The new QUARTZ MTB pedals are equipped with an all new retention spring that allows firmer cleat entry-release. The technical concept is the same proven system as the 2008 pedals but the retention spring material has been improved. It's lightweight, simple and an excellent performer. Quartz MTB pedals are known to be one of the best pedals on the market for cleat support, mud evacuation, lightness, and longevity. The new QUARTZ MTB pedal delivers better cleat engagement and support in the most demanding marathon and CX conditions.
• MUD EVACUATION
The simplicity and design of this pedal with its open area between the pedal body and retention spring allows excellent mud evacuation in the worst climatic conditions.
• Spaced out axis line
• LARGE SUPPORT AREA
The large support area between the shoe cleats and the platform on the shoe make the QUARTZ a stable and efficient performer.
Adjusting washers of .5mm, 1mm and 2mm are delivered with the pedals to assure optimum contact with different shoe models.
• Large pressing area (380mm2) and pressing width (58.4mm)
• WEIGHT: 130 G
QUARTZ Carbon is one of the the lightest pedals on the market.
• INJECTED CARBON BODY
The injected carbon body saves weight and delivers excellent mechanical performance
• AXLE SYSTEM 2 BEARINGS / STEEL AXLE
• The QUARTZ Carbon is equipped with a lightweight oversized steel axle. 2 micro cartridge bearings and one needle cartridge bearing.
• Reinforced seals protect the bearings in extreme use. The cartridge bearings have seals on the exterior of the cartridge.
• TI axles save weight without compromising strength. Look axles are approved after a rotational test of a million eccentric (which creates a shock during each revolution) cycles at 100 rpm with 90kg loaded on the center of the axle. This is well beyond the required EN14781 test of 100,000 cycles at a 65kg load.
• Exploded view of Quartz pedal
